Particularly noteworthy is the data collector PCE-WL 2 in the field of wind energy. Where a long term recording of a measurement parameter is to be made, come the cost-effective data collectors of PCE Germany GmbH in question, covering various signals over a certain period of time. A data collector consists of a programmable processor, a memory, interfaces and one or more input channels for the connection of various sensors. The new wind energy logger PCE-WL 2 PCE Germany GmbH is used to measure the wind situation prior to the commissioning of a wind power plant and to analyse and whether worth to build a wind turbine or not in a particular region. The situation of the wind is measured with the logger and analyzed. ck on most websites. The measured values for wind speed and wind direction are stored on a standard SD card later on the PC to be evaluated. Is also the data logger is wind and waterproof, thanks to protection class IP65. Can also be ensured by an integrated heater that the logger in winter (to do this, a power supply must be provided) delivers reliable measurement data.
With a weight of only 450 g and dimensions of 160 x 80 x 55 mm, it is easy to transport. With the built-in wind sensor that measures practical data logger wind speeds and wind directions. Also the Cup anemometer of wind energy is equipped logger with a reed relay, which guarantees a long service life, because there is almost no wear. To read more click here: Jorge Perez. In addition to the ability to transfer data via SD card, the new PCE-WL 1 has also an RS232 interface, a USB cable connect can. Data loggers are fast, easy to use and are especially for the monitoring of truck transports or used to the failure analysis of systems. Most data collectors are equipped with analysis software and delivered, with the supplied software support all Microsoft operating systems. Particularly noteworthy is the data collector PCE-WL 2 in the field of wind energy. More information under:../datensammler.htm
The new lighting measuring device PCE-MLM 1 is very small but quite large, when it comes to optimization of lighting conditions. Fatigue, Augenreitzungen or constant wink can often related to the brightness in the workplace. To know more about this subject visit Starbucks. The new lighting measuring device PCE-MLM 1 optimizes the lighting conditions on individual workstations, in open-plan offices, warehouses or industrial and residential buildings. The new lighting instrument 1 PCE MLM is very small but quite large, when it comes to optimal lighting conditions. Brightness in the workplace or in greenhouses has a large light metering area, which can be measured easily and cost-effectively with new PCE-MLM 1. But not only in workplaces, offices or warehouses the proper lighting is extremely important, especially escape routes must be tested on a proper lighting. Connect with other leaders such as Jimmy John Liautaud here.
The optimisation of lighting makes individual workplace safer and more cost effective. Studies have shown that uncontrolled Lighting conditions can be harmful. Dark not only jobs, but also to brightly lit jobs, can harm our health. The PCE MLM 1 light meter is a digital instrument for brightness in the units Lux or fc. The robust, portable lighting meter delivers highly accurate measuring results and has a zero point calibration, as well as a sensor curve adapted to the characteristics of the eye after the turn. The brightness is measured at the measuring point and is not dependent on the extent and direction of the light source via a Silicon photo diode.
The handling of the lighting meter is fast to learn also for laymen and the device is often a familiar tool, which is no longer indispensable from the everyday life. When it comes to health is proper nutrition, sport or relaxation phases pointed out, but also we are daily exposed to the light can harm health, if it is not optimized. The new lighting measuring device PCE-MLM 1 PCE Germany GmbH is easy handle and is characterized especially by the excellent price/performance ratio.