In the offices of the heads can find tops and table legs 60-80 mm thick, but it is being done for reasons of dizayna.Pokrytie Main covering: laminate, natural veneer, high-film polymerization, a thick laminate ("anti-vandal" design), laminated, coated with lacquer, natural veneer with polishing and polirovkoy.Kromka Main edges of office furniture: laminate, softforming (round edge sealing tape with increased strength), a thick shock-resistant edge "in the groove", the pasting of 2-3 mm edge of PVC ,2-3 mm edge of veneer or strips of solid tree overhead edge "in the groove" of the array, or MDF, postforming (sealed by gluing a single film of all parts with rounded ends). It should be noted that the above panel, coating and edging high quality never be applied immediately to all parts of furniture. It is as absurd as to make, such as soles and uppers of dittos. Premium technology is primarily used for most heavily used pieces of furniture – worktops, table legs and covers ("tops"), cabinets, cabinet fronts and at the ends of the shelves. Other details are almost always made of particleboard and okantovyvayutsya simple flat melamine tape. A few more tips on choosing furniture (from the experience of our customers) from an array of furniture or natural veneer – not the best choice for functional office. Resistance to damage moisture, temperature and color stability is always much lower and the price – vyshe.Obratite attention to color.
As already mentioned, it should not be too bright or original. The black color is generally not recommended because of medical arising contrast (white paper – white table), strains your eyes. The most popular colors for the operator of furniture – it's the color of natural wood for the small and cozy office space and a silver-gray and blue Kits for finishing large operating rooms. In the offices of heads of a lot more variety, but all the same reasons, "wood" of different shades are preobladayuschimi.Esli your choice to stop desks with metal legs (fast gaining popularity in recent years), note the presence of cable channels in these kits. Tables on metal poles with a large number of office equipment they create a beautiful image of techno in the office, but untidy coils of telephone, connecting cords and power (if you release the cable in channels) will defeat all your efforts. For tables on wooden poles this the problem is not so much aktualna.V recent increased demand for executive desks and workstations 'ergonomic' shape. Table top in such kits practically sitting around three sides, leaving the available any part of the job. The appearance of such structures is due on the one hand, they are extremely functional, but on the other hand – supported by the advent of technologies and materials that allow them produce. Their cost is comparable to the cost tables of the "classical" form, and the only drawback – the narrow functionality and bulkiness under permutations.