HY-LINE computer components electronics presents the new computer on modules of the German manufacturer’s DH. ARM9 module is ideal for visualization and communication of HY-LINE computer components presented the new computer on modules of the German manufacturer’s DH electronics. This COM modules are based on the Freescale’s ARM9 i. MX25 with 400 MHz. This provides improved performance for visualization and communication and allows a fast and economical development of embedded products. He is for extreme conditions, as they are well suited in the industry, because many of the functions and interfaces round off this computer on modules. It is equipped with 32/64 MB Flash, 64/128 MB DDR2-SDRAM@400MHz and an onboard MicroSD socket.
It is designed for displays with a resolution up to 800 x 600 and has a 4/5-wire resistive touch controller on board. The module is very communicative with a 10/100 Mbps Ethernet, two USB, and three UARTs and provides m C and address / data bus enough resources for their own expansion via SPI, I. Also it has a CAN and I is interface. The module is for the extended temperature range of-40 C – + 85 C specified. A corresponding development kit is available for the launch of the design.
In addition, the most common interfaces with matching connectors are equipped. The DH-electronics COM distinguished continue, that it will in future be expandable as an entry-level model with a series of pin compatible to each other with the DHCOM standard. The technical support, marketing and sales staff is competent for all questions.